T1 1950-65 Bubbla framaxel 4″, Kortad axel
Passar till: T1 1950-65 Bubbla
Uppskattad leveranstid: 5-10 dagar.
T1 1950-65 Beetle K&L 4″ Narrowed Beam
Aircooled VW Beetle and Ghia K&L 4 Inch Narrowed Beams, the industry standard in quality
Titan Engineering T1 K&L Beetle Beam 4″ narrowed, installation is simple and easy with no body modifications. Styck beam is built by robots in the UK and fettled to spec by hand. Limebug is the leading supplier of narrowed beams in the industry.
”The all new front beam”
Styck beam is produced from CDS (Cold Drawn Steel) Seamless tubing, then turned to length, Styck adjuster slot is then milled into the tubing along with the 4x grease points. Next we fit our custom Xero adjusters in place which give over 7.5″ of adjustment travel. These adjusters are set in place in such a way as to achieve maximum drop and still give a great range of upper adjustment on nearly all configurations.
Next we laser cut 8mm steel into our beautifully designed end plates, these are then CNC press braked to form a dog leg which will clear all factory inner wings on your new 4″ beam with no cutting, welding or drilling. Now we fit a turned 12×1.5mm solid threaded boss into the upper shock tower. Our shock towers are oversize in length to allow you to run your stock shocks for mild lowering and our gas charged shocks for the extra low Beetle / Ghia owners.
For the final step in the metal core assembly process, we precision load the components into the robot welding cell, at this point we fit our ramped base ’uprights’ which have oversize holes for simple easy installation on all frame heads.
Now the core is built we install our uniquely designed grease cavity / Delrin bushings system. This configuration allows the use of Delrin bushes which have great low wearing properties and will not damage your trailing arms over time, they also do not squeak like Urethane. Finally this also allows you to run factory grease seals keeping your grease in the beam, where it should be.
So that’s how the industry standard of narrowed front axel is made and some of the fantastic features it offers. All beams have the option to a powder coated finish, RHD / LHD, torsion leaves, track rods etc etc. Let Limebug cut out the guesswork and have a hassle free install.
We can now offer worldwide shipping on all Limebug beams. Typically holding over one hundred beam cores on the shelf we can supply the industry standard in quality and finish.
– CDS Mech Grade Tubing
– Gusseted Shock Tower to allow for fully weight baring Shocks
– 8mm Lasercut End-plates
– CNC Body Mounts & Shock Mounts
– Dog Leg Shock Tower Support
– Unique Grease Cavity System
– 12×1.5mm Threaded Welded Upper Boss
– Genuine Derlin Bushes
– 4x Grease Nipples Fitted
– Custom Steering Damper Mount Fitted
– RHD or LHD
– Supplied in Raw Finish or Powdercoated
– Designed, Manufactered and Assembled in the UK
Titan Engineering ”Sawtooth” Skid Plates
Features a steep ramped front edge to deflect the road and debris away from your beam when running extra low. Protects your adjuster unit as well as still allowing adjustability through the access hole.
Sawtooth plates are provided raw unless otherwise stated. Comes with two extended frame head bolts and washers which is all that is required for fitting.
Will fit all Ball Joint and K&L Pin Beams, hole is slotted to allow you to bring the plate up flush to the base of your frame head.
Titan Engineering OE Narrowed Torsion Leaves
Professionally narrowed torsion leaves are the only way to narrow and lower your VW safely. As accredited and certified engineers we give a true cut to the length which work perfectly with our Beams / Front axels. We also use a custom made solid carbide dimple tool to re-produce the factory dimple to the correct depth and pitch.
Styck leaf is chopped down to give the correct shoulder distance to the edge for safety and a clean finish.
All leaves are either OE quality or genuine original stacks refurbished, this is stock dependent.
Product Code: 30020014